Find leaks faster. Protect your fuel assets.
Detect integrity issues before they become costly failures with fast, accurate, digitally verified tank and line testing.
Titan Cloud combines precision testing technology, real-time digital results, engineer-reviewed reporting, and a global network of testing partners to help fuel operators reduce risk, minimize downtime, and make informed decisions about critical fuel infrastructure.
A small leak can become a major liability.
Fuel-system integrity problems are not always obvious. A small leak, faulty fitting, water intrusion, or installation defect can go undetected until it contributes to fuel loss, downtime, environmental exposure, or remediation costs.
Tank shells are not always the source of a leak. Common failure points identified by Titan Cloud testing materials include:
Installation quality, corrosion, incompatible materials, backfill conditions, groundwater, flooding, and ground movement can also contribute to integrity failures.
Know more than pass or fail.
Titan Cloud uses digitized integrity-testing technology to capture quantitative test data in real-time. Onsite technicians receive immediate feedback, and test results are reviewed by qualified engineers.
The goal is to give operators stronger evidence about fuel system conditions and a clearer path to diagnosis, repair, or certification.
Built for confidence in every test.
01 — Precision Technology
Supports tank and line testing, multiple line testing, wet and dry line conditions, and pre-bury/post-bury installation testing.
02 — Digital Data
Provides real-time onscreen feedback and quantitative, repeatable test data that can be retained and reviewed.
03 — Engineer Review
100% of tests are reviewed by qualified engineers, adding centralized technical review and quality control.
What Titan Tank & Line Testing helps you do
Identify small leaks and integrity issues before they develop into larger operational or environmental problems.
Use real-time feedback and faster fault finding to move more quickly from testing to diagnosis and repair.
Support regulatory testing, SIR investigations, and repair verification with documented results.
Find installation and integrity issues while they are still accessible during pre-bury and easier to address.
Testing across the fuel asset lifecycle.
Titan Cloud testing supports four primary use cases: Compliance, troubleshooting, installation and site upgrades, and acquisition/divestment.
Compliance
Support testing and documentation requirements.
- UST regulatory requirements
- SIR variance investigations
Troubleshooting
Investigate unexplained fuel-system behavior.
- Water intrusion
- Accelerated corrosion
- Filter-blocking issues
- Maintenance and repair verification
- SIR fuel loss investigations
- Proactive risk-reduction programs
Installation & Site Upgrades
Verify new or modified systems before commissioning.
- Independent verification of installation workmanship
- Precision testing before commissioning
- Testing after repairs or modifications
Acquisition & Divestment
Understand system integrity before ownership or liability changes.
- Manage liability when divesting sites
- Test acquired sites before transaction close
- Confirm systems are tight and fit for purpose
The best time to find a leak is before you bury it.
Titan Cloud uses the only USEPA certified pre-bury and post-bury testing methods to verify new fuel systems at critical stages of installation.
Test tanks, lines, fittings, and associated components before backfilling while the system is still accessible. If an issue is identified, the installer can repair and retest before burial.
Test again after backfilling and construction activity to verify that the system was not disrupted or damaged during installation.
Use the completed test results to support commissioning decisions and document system integrity before opening.
Test. Repair. Verify. Commission with confidence.
When conventional testing says “pass,” Titan can uncover what others miss.
At a Texas convenience store, repeated SIR alarms indicated a potential leak even after the tank passed three vacuum acoustic tests. Titan Cloud Precision Tank Testing identified low-level liquid loss and minor ullage decay, leading the operator to reline the tank.
At a new installation, product lines passed a standard pressure test but failed Titan Cloud’s pre-bury test. The cause: a faulty gauge displaying 3 PSI even when disconnected.
Accurate testing helps uncover integrity issues before they become costly problems.
Protect your new fuel system from day one.
See how Titan Cloud pre-bury and post-bury testing works alongside installation teams to identify integrity problems while components are still accessible and verify the system again after burial.
Talk to a Testing Expert
Testing backed by measurable performance data.
Precision testing for critical fuel infrastructure.
Decisions based on data.
Real-Time Feedback
Onsite technicians receive immediate onscreen testing data and feedback.
Quantitative Results
Our testing method produces measurable, repeatable data across all tests.
Engineer-Reviewed Reports
Qualified engineers review test results and reporting.
Reviewable Test Data
Provides real-time onscreen feedback and quantitative, repeatable test data that can be retained and reviewed.
Faster Fault Finding
Immediate data can help technicians investigate issues while still onsite.
24/7 Technical Support
Titan Cloud provides round-the-clock technical support to its testing network.
Global technology. Local expertise.
Titan Cloud works with testing specialists across the United States, Canada, and international markets, operating in 25+ countries with 40+ partners worldwide.
This far-reaching network supports fuel retailers and commercial operators across a range of facilities with fuel storage infrastructure.
Local expertise backed by Titan Cloud testing technology.
Better testing supports better decisions.
Tank & Line Testing FAQs
What is tank and line integrity testing?
Tank and line integrity testing determines whether a fuel storage tank, piping system, or associated component is tight or experiencing a leak. It can also support investigation of unexplained fuel loss, water intrusion, and other abnormal system behavior.
When should a fuel system be tested?
Common use cases include regulatory compliance, SIR investigations, suspected fuel loss, water intrusion, new installations, site upgrades, repairs or modifications, acquisitions, divestments, and proactive risk-reduction programs.
What is pre-bury testing?
Pre-bury testing evaluates a newly installed fuel system before components become inaccessible beneath backfill, concrete, or asphalt, allowing identified issues to be repaired while the system is still accessible.
What is post-bury testing?
Post-bury testing verifies that the fuel system remains tight after backfilling and construction activities are complete.
Are Titan Cloud test results reviewed?
Yes. 100% of tests are reviewed by qualified engineers.
Can multiple lines be tested at the same time?
Yes. Multiple line testing is a Titan Cloud testing advantage.
Does Titan Cloud support dry line testing?
Yes. EPA-certified dry line testing is a Titan Cloud capability.
Is Titan Cloud Tank & Line Testing available internationally?
Yes. Titan Cloud tests in 25+ countries with 40+ partners worldwide. See our Testing Partners Directory to locate a provider near you.
Know what’s happening below ground.
Whether you are commissioning a new site, investigating fuel loss, meeting testing requirements, evaluating an acquisition, or protecting an existing fuel network, Titan Cloud provides advanced testing technology, digital test data, engineer review, and access to qualified testing partners.